SMC Networks PF3A801H-L Operation Manual Download Page 39

Page: 39 / 104

-38-

No.PF

※※

-OMY0005

Display [F 1] by pressing UP or DOWN button in function selection mode.

Press the SET button.

Move on to select the target for setting.

Select the target for setting

Press the UP or DOWN button to select the target for setting.



: [F 0] Only the object selected in OUT1 Output is displayed as OUT1 on the upper left.



: For Pulse output, error output and output OFF, only the object selected in [F 0] OUT1 Output is displayed.

Press the SET button to set.

Move on to settings.

a. Flow rate/temperature/pressure is selected: Refer to page

b. Accumulated flow is selected: Refer to page

c. Accumulated pulse output is selected: Refer to page

d. Error output is selected: Refer to page

e. Output OFF is selected: Refer to page

Press the SET button to set.

Return to function selection mode.

[F 1] Setting of OUT1 completed



: Selected item becomes valid after pressing SET button.



: After enabling the setting by pressing SET button, it is possible to return to the measurement mode by keeping pressing SET button.

Summary of Contents for PF3A801H-L









































































































Search results

Summary of Contents for PF3A801H-L

Reviews:

Related manuals for PF3A801H-L

Brands by name

Popular brands

SMC Networks PF3A801H-L, Operation Manual

Search results

Summary of Contents for PF3A801H-L

Reviews:

Related manuals for PF3A801H-L

Brands by name

Popular brands