![background image](http://html1.mh-extra.com/html/smc-networks/pb1313a/pb1313a_operation-manual_1301110013.webp)
-
12
-
7. Specification and how to order
●Specifications
Model
PB1313A
Type of operation
Air operated type
Port size
Main fluid
Suction/discharge port
Rc,NPT,G 1/8 Female thread,
1/4” PFA tube,
LQ1 size 2 with nuts, LQ3 size 2 with nuts
Pilot air
Supply / Exhaust port
Rc,NPT,G 1/8 Female thread
Material
Body wetted areas
New PFA
Diaphragm
PTFE
Check valve
New PFA
、
PTFE
Liquid contact seals
PTFE
Maximum discharge rate
1000mL/min
Note1)
Average discharge pressurer
0 to 0.4MPa
Pilot air pressure
0.2 to 0.5MPa
Air consumption
15L/min(ANR) or less
Suction head
Up to 0.5m
Noise
71dB(A) or less
Withstand pressure
0.75MPa
Diaphragm life (Reference)
50 million times (One time per cycle)
Operating fluid temperature
0 to 50
℃
(No freezing, heat cycle is not applied)
Ambient temperature
0 to 50
℃
(No freezing, heat cycle is not applied)
Recommended operating cycle
1 to 5Hz
Pilot air solenoid valve recommended Cv factor
0.2
Note2)
Weight
0.3 kg
Mounting orientation
FLUID OUT port at top
Maximum operating viscosity
100mPa
・
s
Packaging environment
Double clean packaging
The values above are at normal temperature and with clean water.
Note 1) When the piping length of both the suction side and the discharge side is almost 0m.
It may not be possible to obtain the discharge in the specification depending on the piping
conditions. With the air operated type, it may not be possible to obtain the discharge in the
specification depending on the piping conditions for the pilot air.
Note 2) Operation is possible with a valve with small Cv value when the operation cycle is small.
Summary of Contents for PB1313A
Page 19: ...18 10 Outer dimensions...