①
Do not use organic solvent to wipe the area of the name plate that shows the model.
It will erase what is indicated on the name plate.
②
Do not hit the rotating table by securing the body or hit the body by securing the rotating table.
These actions could cause the table to bend or damage the bearing. When a load must be coupled to
the rotating table, secure the rotating table.
③
Do not step directly onto the table or on the equipment that is coupled to the table.
Standing directly on the rotating table could cause the rotating table or the bearing to become damaged.
④
If a product is equipped with an angle adjustment function, use it within the specified adjustment
range.
If the product is used outside the specified adjustment range, it could lead to equipment malfunction or
product damage. Refer to the product specifications for details on the adjustment range of the products.
Piping
①
Refer to the Fittings and Tubing Precautions (Best Pneumatics No.6) for handling one touch
fittings.
②
Preparation before piping
Before piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove
chips, cutting oil and other debris from inside the pipe.
③
Wrapping of pipe tape
When screwing piping or fittings into ports, ensure that chips from the pipe threads or sealing material
do not enter the piping. Also, if pipe tape is used, leave 1.5 to 2 thread ridges exposed at the end of the
threads.
Speed and Cushion Adjustment
①
To make a speed adjustment, gradually adjust starting from the low speed end.
If the speed adjustment is performed from the high speed end, it could damage the product.
As a result, it could pose a hazard to humans and damage the machinery and equipment.
②
For products with shock absorbers, when the shock absorber stops moving before reaching
the stroke end by using a stopper mechanism with the objective of shortening tact time, be sure
the shock absorber is stopped in a position where it has adequately absorbed the kinetic
energy.
Failure to do so can result in damage to equipment.
- 8 -
Caution
Caution
Warning
Pipe tape
Leave approx. 2 threads exposed
Winding direction
