![background image](http://html.mh-extra.com/html/smc-networks/mhm-25d-x7400a/mhm-25d-x7400a_operation-manual_1300593016.webp)
- 15 -
5.Operating method or operation
5-1
.
Precautions for Design
Warning
1.The product is designed for use only in compressed air systems. Do not operate at pressures or
temperatures, etc., beyond the range of the specifications, as this can cause damage or malfunction
of the cylinder and other equipment. (Refer to the specifications.)
Please contact SMC if using fluids other than compressed air. The product cannot be guaranteed if
is used outside of the specification range.
2.Take safety measures (e.g. mounting protective covers) when there is a danger of fingers being
caught in a gripper or workpieces causing damage, etc.
3.There is a danger of workpieces dropping if there is a decrease in gripping force due to a drop in
circuit pressure caused by a power failure, etc. It is necessary to take measures such as drop
prevention so that injury and damage to machinery or equipment can be prevented.
4. If the product is used for a purpose other than the transportation of a workpiece such as positioning
or clamping, please consult SMC.
!
Caution
1. Finite orbit type guide is used in the actuator finger part. By using this, when there are inertial force
which cause by movements or rotation to the actuator, steel ball will move to one side and this will
cause a large resistance degrade the accuracy. When there are inertial force which cause by
movements or rotation to the actuator, operate the finger to full stroke.
Summary of Contents for MHM-25D-X7400A
Page 23: ... 22 ...