-19-
No.LFE****-OMZ0013
Function Setting
Function selection mode
In measurement mode, press the
button for 2 seconds or longer to display [F 0] on the main screen.
In this mode, you can change the function settings. Display the function number [F
□□
].
Press and hold the
button for 2 seconds or longer in the function selection mode to return to measurement
mode.
*: The sub screen
displays the
content of the
function and
the function
setting in turn.
The function number is
increased and decreased
by the
and
button.
Display the required
function number and
press the
button.
■Default Setting
The default settings are as follows.
If these settings are acceptable, retain for use.
To change a setting, enter function selection mode (Refer to the table below).
■[F 0] Selection of sensor
See page 21
Item
Description
Default setting
Range selection of
the sensor to be
connected
The flow rate range of the sensor to be connected is set.
Rated flow rate
20 L/min type
■ [F 1] Setting of OUT1
Page 22
Item
Description
Default setting
Output mode
Selects the switch output type from: Instantaneous flow (either
hysteresis or window comparator mode), accumulated flow,
accumulated pulse.
Hysteresis mode
Reverse output
Selects which type of switch output is to be used, normal or
reversed.
Normal output
Set value
Sets the ON and OFF point of the switch output
50% of rated flow
Hysteresis
Appropriate setting of the hysteresis prevents the switch
output from chattering.
5% of rated flow
Display color
Select the color of the main screen.
Output ON: Green
Output OFF: Red
■ [F 2] Setting of OUT2
Page 30
Item
Description
Default setting
Output mode
Selects the switch output type from: Instantaneous flow (either
hysteresis or window comparator mode), accumulated flow,
accumulated pulse.
Hysteresis mode
Reverse output
Selects which type of switch output is to be used, normal or
reversed.
Normal output
Set value
Sets the ON and OFF point of the switch output
50% of rated flow
Hysteresis
Setting of hysteresis can prevent chattering.
5% of rated flow
*: Display color is linked to the setting of OUT1, and can not be selected.
Summary of Contents for LFE0 Series
Page 1: ...Doc No LFE OMZ0013 Product Name Flow Monitor Model Series Product Number LFE0 SMC Corporation ...
Page 36: ... 35 No LFE OMZ0013 List of output modes for fluid temperature ...
Page 42: ... 41 No LFE OMZ0013 F20 External input This item is not used for this specification ...
Page 66: ... 65 No LFE OMZ0013 Dimensions Front protective cover Panel mount adapter R ...