SMC Networks LER Series, Operation Manual, Page: 18 / 48

- 17 -
or
Communication
cable
PC
Conversion
unit
PLC
Power supply
DC24V
USB cable
(A-miniB type)
●
Controller
位 置 速度
100
500
200 1000
50 200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現 在位 置
120.3
現 在速 度
200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
位 置 速度
100
500
200 1000
50 200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現 在位 置
120.3
現 在速 度
200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
●
Controller setting kit
(Controller setting software
Communication cable,
Conversion unit and
USB cable are included.)
Part No:LEC-W2
Controller setting
software
Motor cable
●
Actuator cable
Part No:
･
LE-CP- *-*
(Robotic type cable)
･
LE-CP- *S-*
(Standard cable)
3. Product Outline
3.1 System construction
※
When the controller setting software/version is below 1.1, the display unit is distance (mm), but the
product recognizes it as an angle (°). To upgrade the software, please go to the operation manual
page of the SMC website.
http://www.smcworld.com/
Warning
Refer to the operation manual of the LEC (controller) for detailed wiring.
/See 4 Wiring of cables on p.29.
Communication cable is to be connected to PC by USB cable through conversion unit.
And do not connect teaching box to PC.
Use only specified cables otherwise there maybe fire risk and damage.
The actuator body and controller are sold as a package.
If When only the actuator is purchased seperately, confirm that the combination
of the controller, which you have and the actuator is compatable.
/ See 5.3
Caution (1) on p. 36
<Be sure to check the following before use.>
(1) Check that actuator label for model number.
This matches the controller.
(2) Check Parallel I/O configuration matches (NPN or PNP).
●
I/O cable
Part No:LEC-CN5-

●
Teaching box
(with 3m cable)
Part No:LEC-T1-3EG

Power supply plug
<Applicable cable size>
AWG20 (0.5mm
2
)
To CN5
●Electric Rotary Table
Option
To CN4
To CN1
To CN2
To CN3
Power supply
DC24V
To CN4
(1)
(2)
LER10K
NPN
Note 1)
Note 1)
Note 1): These items are included when it is selected
by ordering code.
Note 2):
When conformity to UL is required, the
electric actuator and controller should
be used with a UL1310 Class 2 power
supply.
Note 2)
Note 1)
Note 2)