![background image](http://html1.mh-extra.com/html/smc-networks/lecsn-t-series/lecsn-t-series_operation-manual_1299644031.webp)
-30-
(2) Trigger
“Trigger” is a condition which decides the display timing of the graph.
If trigger conditions are not satisfied, waveform will not be displayed.
①
Click “
“ of [Data] to set the condition.
(In general, set the Motor speed.)
②
“Level” / “Condition” / “Position” are displayed.
Click “ “ of “Level” / “Condition” to set the condition.
For Motor speed, when the operation direction is positive, “Level” should be 100
and when the operation direction is negative, “Level” should be “-100”.
Align the setting of “Condition” to the operation direction too.
“Level” / “Condition” setting
(
For Motor speed
)
Operating direction
“Level”
[r/min]
“Condition”
Positive direction operation
100
Startup
Negative direction operation
-100
Fall
(3) Waveform
Set the waveform data which will be displayed in the graph.
①
②