-10-
3. Startup
The following are the procedures for startup, actuator operation, and startup of the setup software.
3.1
Startup procedure
This section shows the startup procedure when installing the actuator for the first time.
For details, refer to "LECSN-T Operation Manual, Section 4.1”.
Wiring check
Refer to “Chapter 2 Wiring”
Network setting
Refer to “Chapter 7 Network setting”
Test operation of actuators
with setup software
Refer to “Chapter 5 Test operation”
Parameter setting
Refer to “Chapter 4 Parameter setting”
Actuator operation from host
Refer to “Chapter 8 Operation from host”
Actual operation
Monitor
Refer to “Chapter 6 Monitor”