![background image](http://html1.mh-extra.com/html/smc-networks/lecsa-series/lecsa-series_operation-manual_1299639052.webp)
-
50
-
5.6 Positioning Mode in Setup Software
①
From the Test Mode menu of the Setup Software select Positioning Mode. The Move Distance Unit
Selection window opens.
②
Check Command pulse unit (Electronic gear valid) and click OK.
Electronic gear ratio that is set in the PA05 / PA06 / PA07 is enabled.
③
Click OK.
(When using this function, external input signal operation will be disabled. When controlling from a
PLC or upper level device, the power must be turned off and then on.)
④
The Positioning Mode window opens.
①
②
③