- 19 -
3.2 Parts description
The detailed descriptions of each part are as follows:
A
Side
(Controller version)
A Side
No.
Label
Name
Description
(1)
-
LED
LED to indicate the condition of the controller.
Please refer to the
“8. LED Display”
(2)
CN5
Communication plug
connector
Used to connect the CC-Link line.
(3)
STATION
NO.
STATION NO. switch
Switch for setting address (01 to 64) X1 and X10
(4)
B RATE
Communication speed
change switch
Used to set the communication speed of CC-Link.
(5)
CN4
Serial I/O Connector
(8 pin)
Used to connect the teaching box (LEC-T1), Controller
setting kit (LEC-W2), etc.
(6)
CN3
Encoder connector
(16 pin)
Used to connect the actuator cable.
(7)
CN2
Motor power connector
(6 pin)
(8)
CN1
Power connector
(5 pin)
Used to connect the controller power supply (24 VDC) with
the power supply plug.
Common power(-),Motor power (+),Control power(+),Stop
),Lock r)
(9)
-
Applicable electric
actuator model
number label
The label indicating the applicable electric actuator model.
(10)
-
Controller label
The label indicating the part number of the controller.
(11)
-
FG
Functional ground
(When the controller is mounted, tighten screws and connect
the grounding cable.)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)
(1)
(9)
ARX830007
3
SV１.00
Label of Controller version
Example) SV2.07-1.00
(10)
