![background image](http://html1.mh-extra.com/html/smc-networks/jxcm1/jxcm1_operation-manual_1299623045.webp)
- 44 -
No.JXC#-OMX0009-A
0B
INP
The condition when “INP” turns ON depends on
the electric actuator action.
•Return to origin
Turns ON at the origin when within the ±"default
iIn position" in the Basic parameters.
•During positioning operation
Turns ON when the current position is within
"Step data position ± positioning range".
•During pushing operation
Turns ON when the pushing force exceeds the
value set in the step data "Trigger LV".
Caution
After the pushing operation is completed, even if it
switches automatically to energy saving mode, “INP”
remains ON.
When movement starts again from the pushing
stopped state, pushing operation is repeated with the
normal pushing force.
E.g.) Step data "force" is 100%
Step data "Trigger LV" is 80%,
The energy saving setting of the actuator is 40%.
*1)
*1) The actuator model determines the energy saving
settings.
Please refer to the manual of the electric actuator
for more details.
0C
AREA
When the actuator is within the output range
between Area1 and Area2 in the step data, this
signal will be turned ON.
The range changes depending on the active step
data.
0D
WAREA
When the actuator is within the output range
between "W area 1 and W area 2" of basic
parameter, this signal will be turned ON.
0E
ESTOP
During activation of the Teaching Box stop switch,
this signal is ON. During the normal operation, it is
OFF.
This is synchronized to the input for the EMG
signal on the controller PWR connector.
0F
ALARM
Alarm generated when problems occur to the
electric actuator or its controlling status. It is OFF
when there are no alarms.ON in alarm condition.
10 to 1A
CC-Link
system area
(No used)
(No used)
-
1B
Remote
station
READY
● Only at Single numerical data instructions
During the normal status, this terminal is OFF,
during the abnormal status (The WDT time-out
of CPU is generated) this is ON.
1C to 1F
CC-Link
system area
-
20 to 2F
Energy saving mode
Time
Trigger LV
INP (ON)
100
80
40
Pushing force
(%)