-14-
No. JXC
※
-OMY0008
3.2 Parts Description
Details of the parts of the controller.
No.
Display
Name
Details
1
-
Display
LED’s to indicate the controller status.
2
IN, OUT
EtherCAT
communication
connectors
Connect to the EtherCAT network.
3
ECAT ID
EtherCAT ID
Switches to set the slave EtherCAT communication
ID (0 to 255) by X1, X10 and X100.
4
SI
Serial I/O connector
(8 poles)
Connector for the teaching box (LEC-T1) or the
controller communication cable (JXC-W2A-C).
5
ENC
Encoder connector
(16 poles)
Connect to the actuator cable.
6
MOT
Motor driving connector
(6 poles)
7
PWR
Power supply connector
(5 poles)
Connect to the controller power supply (24VDC)
using the power supply plug.
Control power (+), Stop signal (+), Motor power (+),
Lock release (+), Common power (-)
8
-
Applicable actuator part
number label
Label indicating the actuator part number which can
be connected to the controller.
9
-
Controller part number
label
Label indicating the controller part number.
10
-
FE
Functional Ground
When the controller is mounted, tighten screws and
connect the grounding cable.
9
2
4
5
6
7
8
3
10
1
A side
O y S 3 . 5 T 1 . 1
Software version of the
communication board
Software version of the
control board
Oy S3.5T1.1
A side view
Label of controller version
Label content details:
*”S3.5 T1.1” is an example.
