![background image](http://html1.mh-extra.com/html/smc-networks/jxceh/jxceh_operation-manual_1299620051.webp)
-50-
No. JXC
※
-OMY0008
[2] Positioning operation
- Procedure -
- Timing chart -
(1) Input step data No. (“IN0” to “IN5”)
(2) Turn ON the "DRIVE".
(“INP” turns OFF.)
Scan the specified step data
number (from "IN0" to "IN5").
(3) "BUSY" turns ON.
(and the positioning movement
starts.)
∗
After "BUSY" turns ON, if
"DRIVE" is turned OFF, the
step data number will be
output (from "OUT0" to
"OUT5").
(4) When "INP" turns ON and
"BUSY" turns OFF, the
positioning operation will be
completed.
Power supply
IN0 to 5
SVON
DRIVE
OUT0 to 5
BUSY
SVRE
SETON
INP
External lock
Status
signals
Control
signals
Positioning
operation
Speed
24V
0V
Unlock
Held
ON
OFF
ON
OFF
0mm/s
-
-
-
-
-
-
-
-
-
-
-
-
More than twice
the communication
cycle time
Input Step Data No.
Read Step data No.
Output Step
Data No.
If the current position is inside of step
data positioning, the INP signal is ON.
Otherwise, the signal is OFF
Don’t care