-26-
No. JXC
※
-OMT0002-C
4. Product Specifications
4.1 Basic Specifications
Item
Specifications
Number of axes per controller
Max. 4-axis
Controlled motor
Step motor (servo 24 VDC )
Encoder
Incremental phase A / B (Encoder resolution 800 pulse / rotation)
Power supply specification
Note1)
Main control power supply
Power supply voltage: 24VDC+/-10%
Max. current consumption: 350 mA
Motor drive and motor control power supply
Power supply voltage: 24VDC+/-10%
Max. current consumption: Depends on connected actuator.
Note2)
Serial communication
USB2.0 (Full Speed 12Mbps)
Memory
Flash ROM and EEPROM
LED indicator
LED description
Details
PWR
Power supply status
RUN
Operation status
USB
USB connection status
ALM
Alarm status
NS
EtherNet/IP communication status
MS
Controller status
L/A
Data transmission status
100
EtherNet/IP communication speed
Lock control
With forced lock-release terminal
Note3)
Cable length
Actuator cable: 20m maximum
Cooling method
Natural air cooling
Operating temperature range
0 to 40
o
C (No freezing)
Operating humidity range
90% RH or less (No condensation
）
Storage temperature range
-10 to 60
o
C (No freezing)
Storage humidity range
90% RH or less (No condensation
）
Insulation resistance
Between the external terminals and case
50MΩ (500 VDC)
Weight
1050 g (Direct mounting)
1100 g (DIN rail mounting)
Note 1) Do not use a power supply with "inrush currentprotection" for the motor drive power and motor
control power supply.
Note 2) Power consumption depends on the actuator connected. Refer to the actuator specifications
for further details.
Note 3) Applicable to non-magnetizing lock.