Parallel I/O (
JXC73/83
)
EtherNet/IP
TM
Type (
JXC93
)
Item
Specifications
Number of axes
Max. 4 axes
Compatible motor
Step motor (Servo/24 VDC)
Compatible encoder
Incremental A/B phase (Encoder resolution: 800 pulse/rotation)
Power supply
*
1
Main control power supply Power voltage: 24 VDC
±
10%
Max. current consumption: 350 mA
Motor power supply, Motor control power supply (Common)
Power voltage: 24 VDC
±
10%
Max. current consumption: Based on the connected actuator.
*
2
Communication
Protocol
EtherNet/IP
TM
*
4
Communication speed
10 Mbps/100 Mbps (automatic negotiation)
Communication method
Full duplex/Half duplex (automatic negotiation)
Configuration file
EDS file
Occupied area
Input 16 bytes/Output 16 bytes
IP address setting range
Manual setting by switches: From 192.168.1.1 to 254, Via DHCP server: Arbitrary address
Vendor ID
7 h (SMC Corporation)
Product type
2 Bh (Generic Device)
Product code
DCh
Serial communication
USB2.0 (Full Speed 12 Mbps)
Memory
Flash-ROM/EEPROM
LED indicator
PWR, RUN, USB, ALM, NS, MS, L/A, 100
Lock control
Forced-lock release terminal
*
3
Cable length
Actuator cable: 20 m or less
Cooling system
Natural air cooling
Operating temperature range
0
°
C to 40
°
C (No freezing)
Operating humidity range
90% RH or less (No condensation)
Storage temperature range
–10
°
C to 60
°
C (No freezing)
Storage humidity range
90% RH or less (No condensation)
Insulation resistance
Between all external terminals and the case: 50 M
W
(500 VDC)
Weight
1050 g (Screw mounting), 1100 g (DIN rail mounting)
*
1: Do not use a power supply with inrush current protection for the motor drive power and motor control power supply.
*
2: Power consumption depends on the actuator connected. Refer to the actuator specifications for further details.
*
3: Applicable to non-magnetizing lock.
*
4: EtherNet/IP
TM
is a trademark of OVDA.
Specifications
Item
Specifications
Number of axes
Max. 4 axes
Compatible motor
Step motor (Servo/24 VDC)
Compatible encoder
Incremental A/B phase (Encoder resolution: 800 pulse/rotation)
Power supply
*
1
Main control power supply Power voltage: 24 VDC
±
10%
Max. current consumption: 300 mA
Motor power supply, Motor control power supply (Common)
Power voltage: 24 VDC
±
10%
Max. current consumption: Based on the connected actuator.
*
2
Parallel input
16 inputs (Photo-coupler isolation)
Parallel output
32 outputs (Photo-coupler isolation)
Serial communication
USB2.0 (Full Speed 12 Mbps)
Memory
Flash-ROM/EEPROM
LED indicator
PWR, RUN, USB, ALM
Lock control
Forced-lock release terminal
*
3
Cable length
I/O cable: 5 m or less, Actuator cable: 20 m or less
Cooling system
Natural air cooling
Operating temperature range
0
°
C to 40
°
C (No freezing)
Operating humidity range
90% RH or less (No condensation)
Storage temperature range
–10
°
C to 60
°
C (No freezing)
Storage humidity range
90% RH or less (No condensation)
Insulation resistance
Between all external terminals and the case: 50 M
W
(500 VDC)
Weight
1050 g (Screw mounting), 1100 g (DIN rail mounting)
*
1: Do not use a power supply with inrush current protection for the motor drive power and motor control power supply.
*
2: Power consumption depends on the actuator connected. Refer to the actuator specifications for further details.
*
3: Applicable to non-magnetizing lock.
5
JXC73/83/93
Series