- 8 –
No.JXC
※
-OMY0002
2.3
How to Order
The part number construction for this product is as follows:
ＪＸＣ
□
Ｈ
□□
－
□
Electric equipment
Controller
Electric actuator model
Controller type
U
Number of shaft type of power supply
Note 1) Specified software (LEC-BCW) is required.
Mounting
I/O cable length
Caution
The controller and the electric actuator are factory set Confirm the combination of the controller
and the electric actuator is correct.
Connect the designated electric actuator to the high performance controller.
<Check the following before use.>
(1) Check the electric actuator label for the model number. Check that this matches the controller.
(2) Check Parallel I/O configuration matches (NPN or PNP)
Controller
(1) (1) (2)
LEFS25FB-100
NPN
LEFS25FB-100
Electric actuator
DIN rail mounting
8
Screw mounting
7
6
Parallel I/O input type
(64-point, NPN)
5
Parallel I/O input type
(64-point PNP)
1.5m
1
None
Nil
3m
3
5m
5
Blank controller
*1)
BC
Stroke example: For LEFS25FB-100B-R3CM1T,
specify LEFS25FB-100.
(Enter from the electric actuator part number "LE"
to "stroke/ rotating angle")
1 axis, power supply 24 VDC,
High performance type
H
