5
140
140
5
5
38 or less
34 or less
26
10 or more
SV9
SV10
SV7
SV8
SV5
SV6
SV3
SV4
SV1
SV2
IN2
IN1
OUT2
OUT1
2
F
SW2
SW1
0
9
8
7
6
5
4
3
2
1
3
1
F
F
O
F
O
SW8
1 2
3
456
7
8
90
0.01 to 0.99
0 to 299
sec
sec
OFF
ON
0
0
0
0
0
Rotary switch for setting output
Output terminal block
Common terminal block
4 x ø4.5
Power supply terminal block
Power supply switch
Digital switch for setting OFF time
Digital switch for setting ON time
DIP switch for setting cascade
DIP switch for setting two-time hitting
Terminal block for cascade connection
LED10
LED9
LED8
LED7
COM
FG
AC2
AC1
LED
14
POW
LED
13
IN
LED
12
CAS
LED
11
OUT
LED6
LED5
LED4
LED3
LED2
LED1
1A
ON
OFF
Dimensions
Pressure Terminology
Other
1. Maximum operating pressure differential
The maximum pressure differential (the difference between the
inlet and outlet pressure) which is allowed for operation. When
the outlet pressure is 0 MPa, this becomes the maximum oper-
ating pressure.
2. Minimum operating pressure differential
The minimum pressure differential (the difference between the
inlet pressure and outlet pressure) required to keep the main
valve fully open.
3. Maximum system pressure
The maximum pressure that can be applied inside the pipe-
lines (line pressure).
[The pressure differential of the solenoid valve portion must
not exceed the maximum operating pressure differential.]
1. Symbol
In the symbol (
), when the valve is closed, flow is
blocked from port 1 to port 2. However, if the pressure in port 2
is higher than port 1, the valve will not be able to block the fluid
and it will flow from port 2 to port 1.
JSXFA
Series
/ Glossary of Terms
10
Dedicated Controller for Operation
VXFC
Series
