![background image](http://html1.mh-extra.com/html/smc-networks/itv2000-series/itv2000-series_easy-programming-manual_1299592004.webp)
Microprocessor-Controlled Electro-Pneumatic Regulator
ITV2000
E A S Y P R O G R A M M I N G G U I D E
Page 4
last updated 11/03/03 10:05 AM
P
ROGRAMMING
T
HE
S
ET
-P
OINTS
3
C
AUTION
:
When setting the minimum pressure and maximum pressure values, the new values take
effect as soon as the SET key is pressed. Use caution to avoid damage or injury.
1.
U
NLOCK THE KEYPAD
•
Press and hold the down key for 2 seconds or longer. The display will blink
L
OC
.
•
Press the set key to unlock the keys.
•
Press the SET key to continue to the next step.
2.
S
ET THE MINIMUM PRESSURE
(
F_1
)
•
Press the UP and DOWN keys until the display shows the desired minimum pressure.
•
Press and release the SET key to continue to the next step.
3.
S
ET THE MAXIMUM PRESSURE
(F_2)
•
Press the UP and DOWN keys until the display shows the desired maximum
pressure.
•
Press and release the SET key to continue to the next step.
4.
S
ET THE MONITOR PRESSURE
(P_1)
•
Press the UP and DOWN keys until the display shows the desired monitor pressure.
•
Press and release the SET key to continue to the next step.
5.
S
ET THE MONITOR PRESSURE
(P_2)
•
Press the UP and DOWN keys until the display shows the desired monitor pressure.
•
Press and release the SET key to finish the setup.
•
The display returns to the current pressure.