![background image](http://html1.mh-extra.com/html/smc-networks/ise20b/ise20b_operation-manual_1300826029.webp)
-28-
No.PS
※※
-OMV0006-D
Function Selection Mode
■
Function selection mode
In measurement mode, press the
button between 3 and 5 seconds, to display [F 0]. Select to display
the function to be changed [F
□□
]. Press and hold the
button for 2 seconds or longer in function
selection mode to return to measurement mode.
∗
: Some products do not have all the functions. If no function is available or selected due to configuration of other functions, [- - -] is
displayed on the sub display (right).
■
Default setting
The default setting is as follows.
If no problem is caused by this setting, keep these settings.
To change a setting, enter function selection mode.
●
[F 0] Display units, switch output specifications and diagnostic information selection function
Page
Units specification
Pressure range
Default setting
"Nil" or M
ISE20B
MPa
ZSE20B(F)
kPa
P
ISE20B
psi
ZSE20B(F)
Item
Default setting
Switch output specifications
PNP
Diagnostic information
ALL