SMC Networks HRSH090 Series, Operation Manual

Page: 55 / 194

HRX-OM-R026
Chapter 4 Starting the Product
HRSH Series 4.2 Preparation for Start
4-3
Press
4.2.2 Setting of circulating fluid temperature
Press the [
▼
] and [
▲
] buttons on the operational panel to change the SV to
required value.
When the temperature of the circulating fluid is set by the communication,
refer to "Communication” in the supplementary operation manual.
Fig. 4-2 Setting of circulating fluid temperature
4.2.3 Setting of pump operation mode
The initial setting of the pump operation mode is pressure controlled mode
and the pressure setting is 0.5MPa. Regarding the pump operation mode,
refer to
“5.17Pump operation mode function”.