SMC Networks HRSH090 Series, Operation Manual

Page: 54 / 194

HRX-OM-R026
Chapter 4 Starting the Product
4.2 Preparation for Start HRSH Series
4-2
4.2 Preparation for Start
4.2.1 Power supply
Turn on the breaker of the customer
’s power supply.
When the product is switched on, the operation panel displays the following
conditions.

The initial screen (HELLO screen) is displayed for 8 seconds on the
operation display panel. Then, the display changes to the main screen
which displays the circulating fluid discharge temperature.

The set value of circulating fluid temperature is displayed as SV on the
panel.

The present value of circulating fluid temperature is displayed as PV on
the panel.

For the option B, option S and HRSH090-

-40-

Turn on the breaker switch on the back of the product.
Fig. 4-1 Power supply