SMC Networks HRSH090 Series, Operation Manual

Page: 103 / 194

HRX-OM-R026
Chapter 5 Display and setting of various functions
HRSH Series 5.17 Pump operation mode function
5-41
5.
Select the circulating fluid discharge pressure from the table below with [
▲] key or [▼]
key, and confirm
by pressing “SEL”.
Table 5.17-3 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available when
the frequancy set mode is selected.
MPa
Set the circulating fluid discharge
pressure.
Pressure unit is MPa: Setting unit is
0.01MPa
Pressure unit is PSI: Setting unit is 1PSI
to
PSI
to
Pump operation frequency
6.
Press the [SEL] key once.
The set screen of pump operation frequency is displayed on the digital display.
PV
SV
7.
Select the pump operation frequency from the table below with [
▲] key or [▼] key, and
confirm
by pressing “SEL”.
Table 5.17-4 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available when the
pressure controlled mode is selected..
to
Set the pump operation frequency.
Increment: 0.1Hz
8.
Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV