HRX-OM-R039
Chapter 5 Display and setting of various functions
5.9
Function to recover from power failure
HRSE Series
5-26
5.9 Function to recover from power failure
5.9.1
Function to recover from power failure
When the power supply is cut due to power failure etc., this function restarts
the operation when the power supply recovers, retaining the conditions
before the power cut.
The [POWER] lamp flashes (5 sec.ON - 0.2 sec.OFF) when the power
failure recovery is set.
The default setting of this function is “OFF”.
Fig 5.9-1
Setting of function to recover from power failure
