SMC Networks HRR010-A-10 Series, Operation Manual

Page: 69 / 166

HRX-OM-X084
Chapter 5 Display and Setting of Various Functions
HRR Series 5.5 Advanced setting mode
5-17
5.5 Advanced setting mode
5.5.1 Switch to advanced setting mode
Settings other than circulating fluid temperature setting are performed in
" Advanced setting mode".
While displaying the main menu TOP screen of "Basic setting mode"
Press and hold the [MENU] key for 5 seconds to switch to "Advanced setting
mode".
" Advanced setting mode" is composed of the following menu.
・
Monitor Menu
・
Standard setting menu
・
Alarm setting menu
・
Communication setting menu
・
Reset menu
・
Information Monitor Menu
・
Alarm history menu
5.5.2 Display contents of monitor menu
The following sensor values not displayed in "Main Menu" of this product are
displayed.
・
Temperature at the inlet of the compressor
・
Ambient temperature
・
Pressure of high pressure refrigerant circuit
・Pressure of low pressure refrigerant circuit
Monitor menu TOP screen
1.
Press and hold the [MENU] key for 5 seconds from the main menu display state to
switch to the monitor menu TOP screen.
℃
RUN
RUN
RUN
「
Basic setting mode
」
[MENU] key
Press and hold
(5 seconds)
「
Advanced setting mode
」
Main menu TOP screen
Monitor menu TOP screen
Monitor menu TOP screen