SMC Networks HRR010-A-10 Series, Operation Manual

Page: 22 / 166

HRX-OM-X084
Chapter 2 Name and Function of Parts
2.4 Operation display panel HRR Series
2-8
2.4 Operation display panel
The operation panel on the front of the product controls the basic operation of
the product
図 2-5 操作表示パネル
Table 2-4 Operation display panel
No Name Function
Reference
page
(1)
Digital display
(7 segment,
5 digits)
Displays the temperature,pressure and flow rate of the circulating fluid
and the set values of other menus.
5.2
(2)
Digital display
(11 segment,
5 digits)
Displays the discharge temperature of the circulating fluid and the set
values of other menus.
(3) [
o
C] lamp
Lights up when temperature is displayed on the digital display.
(4) [MPa] lamp
Lights up when pressure is displayed on the digital display.
(5) [LPM] lamp
Lights up when flow rate is displayed on the digital display.
(6) [H] lamp
Lights up when time is displayed on the digital display.
(7) [SEC] lamp
Lights up when seconds are displayed on the digital display.
(8) [%] lamp
Lights up when pump output setting value is displayed on the digital
display.
(9) [RUN] lamp
Lights up when the product is started and in operation. 4
(10) [ALM] lamp
Lights up when a fault occurs.
(This product will stop.)
7
(11) [WRN] lamp
Lights up when a warning occurs.
(This product will continue operation.)
(12) [ ] lamp
Lights up when
「
AL.01 Tank level drop failure
」
or
「
AL.02 Tank level drop
」
alarm is generated.
-
(13)
Digital display
(11 segment,
1 digits)
「
X
」
is displayed when notice for maintenance is generated. 5.4.4
(14) [RMT] amp
Lights up during remote operation by communication function. 5
(15) [KEYLOCK] amp
Lights up when key lock setting is active.
5.5.3
(16)
［
RUN/STOP
］
key
Press and hold for 1 second to start or stop.
4.2
(17) [MENU] key
Switching of each menu and cancellation of setting values.
5
(18) [ENT] key
Switch to setting mode and set values.
(19) [
▲] key
Move item upward or increase the set value.
-
(20) [
▼] key
Move item downward or decrease the set value.
-
(21) [RESET] key
Reset the alarm.
7
▲
▼
ENT
MENU
RUN/
STOP
RESET
℃
MPa
LPM
SEC
ALM
WRN
RUN
H
21
17
18
19
20
2
1
3
4
5
6
7 15
9
10
11
12
16
％
8
RMT
13
14