SMC Networks HRL100-A, Operation Manual

Page: 24 / 56

HRX-OM-W069
Chapter 2 Contact input/output communication /Analog output communication
2.5 Analog output signal HRL Series
2-14
Table 2.4-5 List of maintenance reminders
Maintenance No. Indication Explanation
MT01 CH1 Pump CH1 pump maintenance
MT02 Compressor Compressor maintenance
MT03 Fan Fan maintenance
MT04 Dustproof Filter Dust-proof filter maintenance
MT05 DI Filter CH2 DI filter maintenance
MT06 CH2 Pump CH2 pump maintenance
MT07 Low Battery Battery maintenance
MT08 CH1 Pressure Sensor
Maintenance for CH1 circulating fluid
discharge pressure sensor
MT09 CH2 Pressure Sensor
Maintenance for CH2 circulating fluid
discharge pressure sensor
MT10 CH2 Flow Sensor
Maintenance for CH2 circulating fluid
flow sensor

Refer to Operation Manual
“Installation ･
Operation
”.
2.5 Analog output signal
The product has two analog outputs.
Setting of the analog output signal is done by the "1.4 Touch panel
flow
” (Refer to "3. Analog Output Settings" screen).
The following signals can be output as analog signals:
・
Analog output signal 1
––“CH1 circulating fluid discharge
temperature
”,“CH2 circulating fluid
discharge temperature
” or “circulating fluid
electric conductivity”.
・
Analog output signal 2
–– “CH1 circulating fluid discharge
temperature
”, “CH2 circulating fluid
discharge temperature
” or “circulating
fluid
electric conductivity”.
Setting of analog output signal
(1)
(2)