QuickServer Start-Up Guide
Page 21 of 45
7.4.2 Retrieve the Configuation File for Modification or Backup
To get a copy of the configuration file for modifying or backing up a configuration on a local computer, do
the following:
•
In the main menu of the FS-
GUI screen, click “Setup”, then “File Transfer”.
•
Click the “config.csv” link under the “Retrieve” heading in the middle section of the screen.
o
The file will automatically download to the web browser’s default download location.
•
Edit or store the file as desired.
NOTE: Before using any backup configuration file to reset the configuration settings, check that
the backup file is not an old version.
Figure 19: Retrieve Configuration File
