![background image](http://html1.mh-extra.com/html/smc-networks/fieldserver-quickserver-fs-qs-2-f-series/fieldserver-quickserver-fs-qs-2-f-series_startup-manual_1299794044.webp)
QuickServer Start-Up Guide
Page 44 of 45
Appendix C.5. Specifications
FS-QS-2XX0-XXXX
2
Electrical Connections
One 3-pin Phoenix connector with: RS-485/RS-232 (Tx+ / Rx- / gnd)
One 3-pin Phoenix connector with: RS-485 (Tx+ / Rx- / gnd)
One 3-pin Phoenix connector with: Power port (+ / - / Frame-gnd)
One Ethernet 10/100 BaseT port
Power Requirements
Input Voltage:
9-30VDC or 24VAC
Current draw:
24VAC 0.125A
Max Power:
3 Watts
9-30VDC 0.25A @12VDC
Approvals
CE and FCC Class B & C Part 15, UL 60950-1, WEEE compliant,
IC Canada, RoHS3 compliant
Capacity Options
FS-QS-20X0: 250 data points
FS-QS-22X0: 3,000 data points
FS-QS-23X0: 500 data points
FS-QS-24X0: 5,000 data points
Physical Dimensions
4 x 1.1 x 2.7 in (10.16 x 2.8 x 6.8 cm)
Weight
0.4 lbs (0.2 Kg)
Operating Temperature
-20°C to 70°C (-4°F to158°F)
Humidity
10-95% RH non-condensing
Figure 36: Specifications
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his expense. Modifications not expressly approved by FieldServer
could void the user's authority to operate
the equipment under FCC rules.”
2
Specifications subject to change without notice.