FS-8700-130 Notifier NCA2-NFS2-3030 Manual
Page 22 of 23
System Trouble
Address
System Trouble
Address
LOOP CONTINUITY TEST FAIL LOOP 2 230
INCOMPATIBLE SOFTWARE OR INVALID CBE
484
LOOP CONTINUITY TEST FAIL LOOP 3 231
WALK TEST - FIRE PROTECTION IS LIMITED
485
LOOP CONTINUITY TEST FAIL LOOP 4 232
REMOTE PROG MODE ACCESSED
486
LOOP CONTINUITY TEST FAIL LOOP 5 233
DIA PROG. CHANGE DET. SERVICE REQUIRED
487
LOOP CONTINUITY TEST FAIL LOOP 6 234
ISIB DATA MESSAGE RECEIVED ERROR
488
LOOP CONTINUITY TEST FAIL LOOP 7 235
ISIB EXECUTIVE ROUTINE RE-ENTERED
489
LOOP CONTINUITY TEST FAIL LOOP 8 236
DIB TO SIB CABLE BAD OR MISSING
490
LOOP CONTINUITY TEST FAIL LOOP 9 237
UPLOAD/DOWNLOAD MESSAGE RECEIVED
491
LOOP CONTINUITY TEST FAIL LOOP 10
238
GLOBAL DATABASE MISMATCH
492
AMP FAIL
239
SIB PROG. CHANGE DET. SERVICE REQUIRED
493
AC FAIL
240
HS-NCM SNIFFER MODE ACTIVE
494
SCB ASSEM. COM. VERIFIED FAILED 241
EXCEEDED CONNECTION LIMIT
495
8255 PORT CHIP CONTROL WORD CHECK
FAILE
242
NAM CCBE. PROG LOST
496
NETWORK COMMUNICATION LINK FAIL
PORT A
243
MEMORY LOSS
497
NETWORK COMMUNICATION LINK FAIL
PORT B
244
DVC COMM LOSS
498
STYLE 4 SHORT A L1
245
A.C. POWER LOSS. BACK UP ACTIVATED
499
STYLE 4 SHORT B L1
246
BUZZER OFF-LINE
500
STYLE 4 SHORT A L2
247
PANEL DOOR OPEN
501
STYLE 4 SHORT B L2
248
OFF NETWORK
502
STYLE 4 SHORT A L3
249
INSTALL. ERROR
503
STYLE 4 SHORT B L3
250
OR AUDIO/TELEPHON
504
STYLE 4 SHORT A L4
251
EXPANDER MODULES
505
STYLE 4 SHORT B L4
252
MANUAL CONTROL
506
STYLE 4 SHORT A L5
253
CAT. COMM. FAULT
507
STYLE 4 SHORT B L5
254
UNKNOWN
508
Appendix C.3. Error Messages
Most error messages are associated with errors in parsing an incoming message from the Notifier panel.
The most likely cause is a mismatch in expected message format. The driver will flag one of the following
error messages and continue. In most cases the message currently being processed by the driver will
also be printed so that any problems can be easily diagnosed.
Two screens ‘System Errors’ and ‘Driver Messages’ exist for displaying errors.
The System Error Screen displays the error number and the Driver messages screen displays the error
number, description and the message received from the NCA/NCA2 Panel.
In debug mode the System Error screen will also include Driver messages.
The following Error Messages appear upon the ‘System Errors’ Screen
%d means numeric number
%s means string
Messages number 1, 3, 4 and 5 will be displayed just once if generated after rebooting or power cycling
the FieldServer.