![background image](http://html1.mh-extra.com/html/smc-networks/fieldserver-bacnet-explorer/fieldserver-bacnet-explorer_startup-manual_1299787021.webp)
BACnet Explorer Start-up Guide
Page 21 of 24
Appendix A Specifications
1
BACnet Explorer
Available Ports
One 6-pin Phoenix connector, one RS-485 +/- ground port,
power +/- frame ground port
Power Requirements
Input Voltage: 9-30VDC or 12-24VAC
Input Power Frequency: 50/60 Hz.
Power Rating: 2.5 Watts
Current draw: @ 12V, 150 mA
Approvals
TUV approved to UL 916 Standard
RoHS Compliant
FCC Part 15 Compliant
CE Mark
Power Requirements
2
Multi-mode power adapter: 9-30VDC or 12 - 24VAC
Physical Dimensions
(WxDxH)
4
5.05
x 2.91 x 1.6 in. (12.82 x 7.39 x 4.06 cm)
3
Weight
3
0.4 lbs (0.2 Kg)
Operating Temperature
-40°C to 75°C (-40°F to167°F)
Surge Suppression
EN61000-4-2 ESD EN61000-4-3 EMC EN61000-4-4 EFT
Humidity
5 - 90% RH
(non-condensing)
Figure 26: Specifications
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his expense.
Modifications not expressly approved by FieldServer could void the user's authority to operate the
equipment under FCC rules”
1
Specifications subject to change without notice
2
Excluding external power supply
3
Excluding mounting tabs