![background image](http://html1.mh-extra.com/html/smc-networks/ex600-dm-series/ex600-dm-series_operation-manual_1299350026.webp)
-25-
No.EX##-OMN0036
LED Display
The status display LED shows the following unit state.
Various kinds of status can be checked as follows
:
•EX600-DX B /EX600-DX C
Display
Content
OFF
The power supply for control and input, or the input device, is OFF.
Green LED is ON
The input device is ON.
Red LEDs are ON
<EX600-DX C1>
The power supply of input device has a short circuit.
<Models other than EX600-DX C1>
The power supply of either input device of adjoined LED has a short
circuit.
Red LED is flashing
Either of the following conditions:
•The input device ON/OFF count has exceeded the set value.
•The input device is open circuit. (Only for EX600-DX C1).
∗
: Refer to troubleshooting (SI unit Operation Manual of protocol used) for the further details of countermeasures.
Summary of Contents for EX600-DM Series
