![background image](http://html1.mh-extra.com/html/smc-networks/ex600-dm-series/ex600-dm-series_operation-manual_1299350013.webp)
-12-
No.EX##-OMN0036
Mounting and Installation
■
Installation
•Direct mounting
(1)When joining six or more units, fix the middle part of the complete EX600 unit with an intermediate
reinforcing brace (EX600-ZMB1) before mounting using 2-M4x5 screws.
Tightening torque: 0.7 to 0.8 Nm.
Intermediate reinforcing brace
(EX600-ZMB1)
(2)Fix and tighten the end plates at one end of the unit. (M4)
Tightening torque: 0.7 to 0.8 Nm.
Fix the end plate at the valve side while referring to the operation manual of the corresponding valve
manifold.
n (Number of connected units)
≦
10
Summary of Contents for EX600-DM Series
