7
6
Product Summary
System structure
( )
( )
Power supply
for output
Power supply
for input and
controling GW
24 VDC
24 VDC
GW unit
Input unit
1 connector
2 inputs type
Input unit
1 connector
1 input type
connecting to
4 sets maximum
Branch cable
(EX510-FC )
Valve manifold
with SI unit
connecting to
4 sets maximum
Connecting to bus
at upper level
(CC-Link)
( )
( )
The system which realizes wiring saving and distributed
installation by connecting to CC-Link. The signal to CC-Link is
transmitted by GW unit, and the signal to input/output device
which is installed discretely is collected by GW unit.
Name of Parts/ Accessories
Communication
connector for
CC-Link
(1 piece)
Power supply
connector
(2 pieces)
Accessory
10
11
8
4
7
5
1
6
9
2 3
No.
Parts
Purpose
1
Communication
socket (BUS)
Connect to CC-Link line with an accessory
connector for CC-Link (
).
∗
2
Power supply
socket (PWR(V))
Supplying power for output instruments such as a
solenoid valve with an accessory connector (
).
∗
3
Power supply
socket (PWR)
Supplying power for controlling GW and for
input instruments such as a sensor with an
accessory connector (
).
∗
4
GW unit side
branch connector
(for input)
Connecting an input unit etc. by using branch
cables (EX510-FC
).
5
GW unit side
branch connector
(for output)
Connecting SI unit (manifold valve) etc. by
using branch cables (EX510-FC
).
6
FG terminal
Used for grounding
7
Mounting hole
Used when a unit is mounted with two M4 screws.
8
DIN rail mounting
slot
Used when a unit is mounted to DIN rail.
9
Display/ switch
setting part
Sets up the switch on such as LED display and
address, I/O points.
∗
: For wiring method, refer to "Wring" in the "Operation Manual".
