CLR
HOLD
0
1
Clear all outputs.
Hold the last state before communication error.
:
:
The default setting is all switches ON, so the MAC ID is set to 63.
The MAC ID should be set in the range of 0 to 63.
500 kbps
Invalid
250 kbps
125 kbps
Communication
speed
0
1
1
0
No.7
1
1
0
0
No.8
Factory default setting is125 kbps.
Factory default setting is HW mode.
The MAC ID and communication speed will be retained if the unit is powered off and software mode
is selected (DIP switch 10).
If HW mode is selected then the settings stored using SW mode will be replaced by the HW settings.
1
1
0
0
0
1
1
0
0
0
:
1
1
0
0
0
32
16
8
:
:
1
1
0
0
0
1
1
1
0
0
:
0
1
0
0
1
4
2
1
No.1 No.2 No.3 No.4 No.5
#62
#63
:
#2
#0
MAC ID
setting
#1
No.6
1
ON
2
3
4
5
6
7
8
9
10
1
DIP SW
0
Communication speed setting
HOLD/CLR setting
0
1
HW
SW/HW
SW
No.10
Setting of the MAC ID and communication speed can be carried out
using the DIP switches No.1 to 8.
Description
SW/HW mode setting
MAC ID setting
HOLD/CLR
No.9
Description
Setting of the MAC ID and communication speed can be carried out
via the DeviceNet network. DIP switches No.1 to 8 will be invalid.
Factory default setting is CLEAR.
It is possible to set the output condition in the event of a communication
error individually via the DeviceNet
TM
network.
If the output condition is set via the DeviceNet
TM
Network then the setting
of DIP switch 9 is invalid.
EX180-TFO09
Contacts
AUSTRIA
(43) 2262 62280-0
NETHERLANDS
(31) 20 531 8888
BELGIUM
(32) 3 355 1464
NORWAY
(47) 67 12 90 20
CZECH REP.
(420) 541 424 611
POLAND
(48) 22 211 9600
DENMARK
(45) 7025 2900
PORTUGAL
(351) 21 471 1880
FINLAND
(358) 207 513513
SLOVAKIA
(421) 2 444 56725
FRANCE
(33) 1 6476 1000
SLOVENIA
(386) 73 885 412
GERMANY
(49) 6103 4020
SPAIN
(34) 945 184 100
GREECE
(30) 210 271 7265
SWEDEN
(46) 8 603 1200
HUNGARY
(36) 23 511 390
SWITZERLAND
(41) 52 396 3131
IRELAND
(353) 1 403 9000
UNITED KINGDOM
(44) 1908 563888
ITALY
(39) 02 92711
URL http://www.smcworld.com (Global) http://www.smceu.com (Europe)
Specifications are subject to change without prior notice from the manufacturer.
© 2011 SMC Corporation All Rights Reserved.
BULGARIA
(359) 2 974 4492
ESTONIA
(372) 651 0370
ROMANIA
(40) 21 320 5111
LATVIA
(371) 781 77 00
LITHUANIA
(370) 5 264 8126
Specification
Connected load: 24 VDC Solenoid valve with light and surge voltage
suppressor of 1 W or less (manufactured by SMC)
Current consumption of power supply for SI unit operation: 0.1 A max.
Ambient temperature for operation: -10 to 50 ℃
Ambient temperature for storage: -20 to 60
o
C
Pollution degree 2: (UL508)
Refer to the SMC website (URL http://www.smcworld.com) for more
information about the product specifications.
Outline Dimensions
Refer to the SMC website (URL http://www.smcworld.com) for more
information about outline dimensions.
Troubleshooting
Refer to the SMC website (URL http://www.smcworld.com) for more
information about troubleshooting.
Setting of the DIP switches should only be carried out with the power
supply turned off.
Open the cover and set the DIP switches with a small flat blade screwdriver.
Setting
LED Display
PWR(V)
PWR
MNS
DIP SW
1
ON
0
LED
Description
MNS
Communication power supply for DeviceNet
TM
is OFF, off line or a MAC ID duplication is
present
PWR(V)
Solenoid valve power supply is supplied at the
specified voltage
PWR
Communication power supply for DeviceNet
TM
is supplied
Solenoid valve power supply is not supplied at
the specified voltage
I/O connection time out (Minor communication
error)
I/O connection is waiting (On line status)
I/O connection is established (On line status)
Communication power supply for DeviceNet
TM
is not supplied
MAC ID duplication error or BUS OFF error
(Serious communication error)
LED status
ON
OFF
Green flashing
Green ON
Red flashing
Red ON
ON
OFF
OFF