C
HAPTER
5
| System Settings
IP Address
– 54 –
IP A
DDRESS
Configuring the access point with an IP address expands your ability to
manage the access point. A number of access point features depend on IP
addressing to operate.
You can use the web browser interface to access IP addressing only if the
access point already has an IP address that is reachable through your
network.
By default, the access point will be not be automatically configured with IP
settings from a Dynamic Host Configuration Protocol (DHCP) server. The
default IP address is 192.168.1.1, subnet mask 255.255.255.0 and a
default gateway of 192.168.1.254.
You will first be prompted to enter the primary and secondary DNS address
for the unit before having access to the other IP parameters.
Figure 20: Set DNS Address
Figure 21: TCP/IP Settings
The following items are displayed on this page:
Summary of Contents for EliteConnect SMCE21011
