SMC Networks EliteConnect SMCE21011, User Manual, Page: 49 / 258

C
HAPTER
4
| Initial Configuration
Quick Start
– 49 –
S
TEP
3
The Step 3 page of the Quick Start configures radio interface settings.
Figure 18: Quick Start - Step 3
The following items are displayed on this page:
I
NTERFACE
S
ETTING
◆
WiFi Mode — Selects mode of operation of the radio chip from
802.11n/g compliant or 802.11n/a compliant. (Default: 11n/g)
B
ASIC
S
ETTING
◆
SSID — Sets the service set identifyer for the primary VAP.
(Default: vap_a0)
S
ECURITY
◆
Association Mode — Selects the security mode for association of
other access points and wireless devices to the access point.
(Default: Open System; Range: Open System, WPA, WPA-PSK, WPA2,
WPA2-PSK, WPA-WPA2-mixed, or WPA-WPA2-PSK-mixed)
◆
Encryption Mode — If set to Open System the Encryption Method is
‘None’, or WEP Keys may be enabled