SMC Networks EliteConnect SMCE21011, User Manual, Page: 172 / 258

C
HAPTER
19
| RADIUS Client Commands
– 172 –
key_string - Encryption key used to authenticate logon access for
client. Do not use blank spaces in the string. (Maximum length: 20
characters)
D
EFAULT
S
ETTING
DEFAULT
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)#radius-server primary key green
AP(config)#
radius-server
accounting-address
This command sets the RADIUS Accounting server network IP address.
S
YNTAX
radius-server accounting-address <address>
address - IP address of the RADIUS Accounting server
D
EFAULT
S
ETTING
0 (disabled)
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆ When the RADIUS Accounting server UDP address is specified, a
RADIUS accounting session is automatically started for each user that
is successfully authenticated to the access point.
E
XAMPLE
AP(config)#radius-server accounting-address 192.168.2.5
AP(config)#
radius-server
accounting port
This command sets the RADIUS Accounting port.
S
YNTAX
radius-server accounting port <port>
port - The port used by the RADIUS Accounting server.
(Range: 1024~65535)