SMC Networks EliteConnect SMCE21011, User Manual, Page: 146 / 258

C
HAPTER
14
| System Logging Commands
– 146 –
C
OMMAND
U
SAGE
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the access point. However, it may be used by the syslog server to sort
messages or to store messages in the corresponding database.
E
XAMPLE
AP(config)#logging facility 19
AP(config)#
logging clear
This command clears all log messages stored in the access point’s memory.
S
YNTAX
logging clear
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)#logging clear
AP(config)#
show logging
This command displays the logging configuration.
S
YNTAX
show logging
C
OMMAND
M
ODE
Exec
E
XAMPLE
AP#show logging
Logging Information
============================================
Syslog State : Enabled
Logging Console State : Enabled
Logging Level : Alert
Logging Facility Type : 16
Servers
1: 192.168.1.19, UDP Port: 514, State: Enabled
2: 0.0.0.0, UDP Port: 514, State: Disabled
3: 0.0.0.0, UDP Port: 514, State: Disabled
4: 0.0.0.0, UDP Port: 514, State: Disabled
=============================================
AP#