manualshive.com logo in svg

SMC Networks D3CM1604V, Administrator'S Manual, Page: 48 / 70

Share
Download
SMC Networks D3CM1604V Administrator'S Manual Download Page 48

Troubleshooting Procedures 

48 

D3CM1604V EMTA Cable Modem Administrator Manual 

Table 4. Checking Basic EMTA Functions  

If… 

Perform This Procedure 

The POWER and other LEDs are OFF. 

1.

 

Turn off the EMTA and then turn it on again to see whether the problem is 

resolved. 

2.

 

Check that you are using the power adapter supplied with the EMTA. 

3.

 

Be sure the power cord is connected to the EMTA and to a functioning power 

outlet. 

4.

 

Plug a working device, such as a lamp, into the power outlet to confirm that the 

outlet is working. 

5.   Be sure the power outlet is not controlled by a wall switch that can inadvertently 

remove power from the outlet. 

The DS and US LEDs are OFF. 

1.

 

Be sure the Ethernet cable connections are secure at the EMTA and at the 

computer. 

2.

 

Be sure that power is turned on to the computer connected to the EMTA. 

3.  Be sure you are using the Ethernet cable supplied with the EMTA or one 

configured similarly to it. 

Check the EMTA’s telephone interfaces 

To confirm that the EMTA’s two telephone interfaces are working properly:  

1.  Lift the handset of the device connected to the EMTA’s telephone 1 interface, and confirm 

that the 

Tel1

 LED goes ON. Hang up the device (place the device onhook) and confirm 

that the 

Tel1

 LED goes OFF. 

2.  Lift the handset of the device connected to the EMTA’s telephone 2 interface, and confirm 

that the 

Tel2

 LED goes ON. Hang up the device (place the device onhook) and confirm 

that the 

Tel2

 LED goes OFF. 

Summary of Contents for D3CM1604V







































































Reviews:

No comments