SMC Networks D3CM1604V Administrator'S Manual Download Page 10

Page: 10 / 70

Getting to Know the EMTA

D3CM1604V EMTA Cable Modem Administrator Manual

Unpacking Package Contents

Unpack the items in your D3CM1604V EMTA Cable Modem contents and confirm that no
items are missing or damaged. Your package should include:

One D3CM1604V EMTA Cable Modem

One Category 5E Ethernet cable

One power supply

One set of quick-installation instructions

If any items are missing or damaged, please contact your cable service provider. Keep the
carton, including the original packing material, in case you need to store the product or
return it.

System Requirements

To complete your installation, you need the following items:

Provisioned Internet access on a cable network that supports cable modem service.

A computer with a wired network adapter with TCP/IP installed.

A Java-enabled Web browser, such as Microsoft Internet Explorer 5.5 or above.

Microsoft

Windows

2000 or higher for USB driver support.

An analog telephone and two RJ-11 cables if you want to connect the EMTA to an
analog telephone and PSTN telephone line.

Summary of Contents for D3CM1604V







































































Search results

Summary of Contents for D3CM1604V

Reviews:

SMC Networks D3CM1604V, Administrator'S Manual, Page: 10 / 70

Search results

Summary of Contents for D3CM1604V

Reviews: