How to Mount and Move the Auto Switch
D-Y7K
Mounting Bracket
Tie-rod Mounting Type
<Applicable auto switch>
Solid state ······
D-Y7K
How to Mount and Move the Auto Switch
1. Fix it to the detecting position with a set screw by installing an
auto switch mounting bracket in cylinder tie-rod and letting the
bottom surface of an auto switch mounting bracket contact the
cylinder tube fi rmly. Fix it to the detecting position with a set screw.
(Use a hexagon wrench.)
2. Fit an auto switch into the auto switch mounting groove to set it
roughly to the mounting position for an auto switch.
3. After confi rming the detecting position, tighten up the mounting
screw attached to an auto switch, and secure the auto switch.
4. When changing the detecting position, carry out in the state of 2.
∗
To protect auto switches, ensure that main body of an auto switch
should be embedded into auto switch mounting groove with a depth of
15 mm or more.
Auto Switch Mounting Bracket Part No. (Including Bracket, Set Screw)
Cylinder
series
Bore size
40
50
63
80
100
CA2
BA4-040
BA4-040
BA4-063
BA4-080
BA4-080
Auto switch
mounting screw
Auto switch
Auto switch
mounting bracket
Hexagon socket head set screw
Note 2)
Series CA2: M4 x 0.7 x 6L
Note 1) When tightening an auto switch mounting screw, use a watchmaker’s
screwdriver with a grip diameter of 5 to 6 mm. Also, set the tightening
torque to be 0.05 to 0.1 N·m. As a guide, turn 90° from the position
where it comes to feel tight.
Note 2) Set the tightening torque of a hexagon socket head set screw (M4 ×
0.7) to be 1 to 1.2 N·m.
Applicable Actuators
Air Cylinder
Description
Series
Bore size
Air cylinder
CA2
40 to 100
7
Series
D-M9K/D-
첸
7K/D-R
첸
K