■
Assemble procedure
(
1
)
Clean each component sufficiently before assembled to prevent a dust from attaching.
Apply the grease which is enclosed to the seal set to each part shown in Table 11. The referential
amount of applied grease is to the extent which can brighten the surface of components.
After that, mount a piston seal to a piston with care not to damage the piston seal.
Table 11
Parts applied with grease
Grease applied parts
Cylinder internal surface
Piston seal groove
Piston seal
Cover gasket
(Size 10,15)
End cover gasket (Size 10,15)
Gasket (Size 20,30,40)
Seal
Body assembly
Wipe off the internal face of the cylinder body with
alcohol, apply grease, and set the bearing to the
housing of the body.
Piston assembly
Mind the mounting orientation of the piston seal.
-33-
Cylinder internal surface
Fig.13
Bearing
Piston seal
Fig.14
Size 20,30,40
Size 10,15
Wear ring
Wear ring
Piston seal
Piston seal
2020-10-13 10:40
DI987004