![background image](http://html1.mh-extra.com/html/smc-networks/crb2bw40-series/crb2bw40-series_operation-manual_1299528024.webp)
7
②
It is recommended to use the method in Figure 2 to avoid applying direct load to the shaft for better
operating conditions.
Figure 2
4-4
.
Piping
As Figure 3 shows, when actuator is used with extended shaft, center the shaft of Rotary Actuator
and the counterpart. If they were decentered, load factor partially becomes large and excessive
bending moment is applied to the shaft. In such a condition, stable operation cannot be obtained
and the shaft may be damaged. In this case, use
Flexible Fitting
(Flexible Joint in JIS).
Figure 3
Caution
Warning
2020-08-27 13:47
DI006501