![background image](http://html1.mh-extra.com/html/smc-networks/crb2bw40-series/crb2bw40-series_operation-manual_1299528023.webp)
6
4.
Installation
4-1
.
Air Supply
①
Filter and regulate air supplied to Rotary Actuator by using SMC Air Filter and Regulator (Series AR).
②
Do not apply lubricant since this is non-lube type.
Internal grease will be flowed out by lubrication so that normal operation will not be obtained.
③
Compressed air containing a large quantity of drain may cause malfunction of Rotary Actuator.
Install After Cooler, Air Dryer or Drain Catch as a measure.
4-2
.
Piping
①
Preparation before piping.
Flush or wash piping thoroughly to remove chips, cutting oil and dust from inside the pipe.
②
When screwing together pipes and fittings, be certain that chips from the pipe threads and sealing material
do not get inside the piping. Also, when pipe tape is used,
leave 1.5 to 2 thread ridges exposed
at the
end of the pipe.
4-3
.
Shaft Load Limit
①
Although static loads shown in Table 2 are allowable, avoid the use applying direct load to the shaft.
Table 2: Allowable Shaft Load
N
Model
Fr
Fs
CRB2BW40
60
40
Note) Point of application of force Fr is the center
to longitudinal dimension of key.
Caution
Caution
Pipe tape
Wrapping
direction
Leave approx.
2 threads exposed.
2020-08-27 13:47
DI006501