－
24
－
6
．
Reassembly of the cylinder
①
Insertion of piston rod ASS 'Y
Please insert piston rod ASS 'Y in the body.
②
Insertion of head cover ASS 'Y
Please insert head cover ASS 'Y in the body.
③
Mounting of the snap ring
Mount the snap ring with proper pliers.
④
Check the assembly condition.
Confirm that there is no air leakage from the seal and that the cylinder can operate smoothly at a minimum
operating pressure.
６－４．
Consumable parts
①
Replaced parts
The service parts are as follows.
CJP2B
□
-PS
Bore size
Seal Kit
Bore size
(mm)
Kit no.
Content and qty.
Rod seal
Piston seal
Gasket
Grease package
6
CJP2B6-PS
1
1
1
1
10
CJP2B10-PS
1
1
1
1
16
CJP2B16-PS
1
1
1
1
②
Storage of seal (for extended period)
1) Put the seal into an enclosed package for storage
2) Avoid exposure to direct sunlight, high temp. and humidity.
Especially, shut off the equipment which possibly causes heat, radiation and ozone from the package.
3) Do not deform or damage the seal by crushing..
4) The seal may have white powder on the surface during storage. This will not effect the performance of the
seal.
③
Grease package
When the grease is added during replacement of the seal and maintenance of the cylinder, use the grease
package.
Grease package
Kit no.
Net
GR-L-005
5g
