SMC Networks CJP2 Series, Operation Manual

Page: 16 / 34

－ 14 －
３－１１． Auto switches
The type and specifications of applicable auto switch and the cautions for handling them can be found in the
catalogue and operation manual respectively.
① Proper Auto Switch Mounting Position (Detection at stroke end) and Its Mounting Height
* When a screw is not mounted on the end of the rod, a nut cannot be mounted.
* A mounting nut is not attached for the clevis and trunnion types.
Part number of auto switch ： D-A9 □， D-A9 □ V Unit ： mm
A
(When detecting
extended stroke
end)
B
(When detecting retracted stroke end)
H H
1
H
2 3
5st 10st 15st 20st 25st 30st 35st 40st
Φ 4 ― ― ― ― ― ― ― ― ― ― ― ―
Φ 6 1 6 11 16 21 26 ― ― ― 13.0 10.0 20.0
Φ 10 1 6 11 16 21 26 31 36 41 16.0 9.5 19.0
Φ 16 1 6 11 16 21 26 31 36 41 18.0 12.0 24.0
Part number of auto switch ： D-M9 □， D-M9 □ V ， D-M9 □ W ， D-M9 □ WV Unit ： mm
A
(When detecting
extended stroke
end)
B
(When detecting retracted stroke end)
H H
1
H
2 3
5st 10st 15st 20st 25st 30st 35st 40st
Φ 4 4 9 14 19 ― ― ― ― ― 14.5 11.5 23.0
Φ 6 5 10 15 20 25 30 ― ― ― 15.0 11.5 23.0
Φ 10 5 10 15 20 25 30 35 40 45 18.0 10.5 21.0
Φ 16 5 10 15 20 25 30 35 40 45 20.0 13.0 26.0
* The above numbers are references for the mounting positions of those auto switches that detect a stroke end.
In the actual setting, determine the actual operation of the auto switch and adjust the position.
B
A
≒ H
1
≒
H
2
≒
H
3