![background image](http://html1.mh-extra.com/html/smc-networks/chsd-series/chsd-series_manual_1299524026.webp)
CHSG
Series
How to Mount and Move the Auto Switch
1.
Fix the auto switch on the auto switch mounting bracket with the
auto switch mounting screw (M4) and install the set screw.
2.
Fit the auto switch mounting bracket into the cylinder tie-rod and
then fix the auto switch at the detecting position with the
hexagonal wrench. (Be sure to put the auto switch on the surface
of cylinder tube.)
3.
When changing the detecting position, loosen the set screw to
move the auto switch and then re-fix the auto switch on the
cylinder tube. (Tightening torque of M4 screw should be 1 to 1.2
N·m.)
<Applicable auto switch>
Solid state ······
D-F59, D-F5P
D-J59, D-F5BA
D-F59W, D-F5PW, D-J59W
D-F59F, D-F5NT
Reed ···············
D-A53, D-A54, D-A56, D-A64, D-A67
D-A59W
Auto switch mounting screw (M4)
Auto switch
Auto switch mounting bracket
Set screw (M4)
Tie-rod
25