A
PPENDIX
B
| FAQ
I want to use Netmeeting, what do I need to do?
– 124 –
I
WANT
TO
USE
N
ETMEETING
,
WHAT
DO
I
NEED
TO
DO
?
1.
If you start Netmeeting as a host, you do not need to change anything
on the Router.
2.
If you start as a response, you need to configure a Virtual Server or
DMZ Host, and make sure the H323 ALG is enabled.
3.
Configure a Virtual Server:
a.
Log in to the Router, click “Forwarding” on the menu, and then click
"Virtual Servers" on the submenu.
b.
On the “Virtual Servers” page, click “Add New”.
c.
On the “Add or Modify a Virtual Server Entry” page, enter “1720” for
the “Service Port”.
d.
Enter your IP address in the “IP Address” field (for example,
192.168.2.169).
e.
Set to Enable and then Save.
Figure 118: Virtual Servers
Figure 119: Add or Modify a Virtual Server Entry
