C
HAPTER
4
| Configuring the Router
Forwarding
– 78 –
3.
Select the protocol used for Trigger Port from the Trigger Protocol drop-
down list, either TCP, UDP, or All.
4.
Select the protocol used for Incoming Ports from the Incoming Protocol
drop-down list, either TCP or UDP, or All.
5.
Select Enable in Status field.
6.
Click the Save button to save the new rule.
Figure 61: Add or Modify a Triggering Entry
To modify or delete an existing entry:
1.
Click
Modify
in the entry you want to modify. If you want to delete the
entry, click
Delete
.
2.
Modify the information.
3.
Click the Save button.
4.
Click the
Enable All
button to make all entries enabled
5.
Click the
Disabled All
button to make all entries disabled.
6.
Click the
Delete All
button to delete all entries
N
OTE
:
When the trigger connection is released, the according opening ports
will be closed.
N
OTE
:
Each rule allowed to be used only by one host on LAN synchronously.
The trigger connection of other hosts on LAN will be refused.
N
OTE
:
Incoming Port Ranges cannot overlap each other.
DMZ
Select
Forwarding -> DMZ
from the menu; you can view and configure
the DMZ host in the screen (shown in
).The DMZ host feature
