C
HAPTER
4
| Configuring the Router
Wireless
– 68 –
1.
Click the Enable button to enable this function.
2.
Select the radio button: Deny the stations not specified by any enabled
entries in the list to access for Filtering Rules.
3.
Delete all or disable all entries if there are any entries already.
4.
Click the Add New button.
a.
Enter the MAC address 00-0A-EB-00-07-8A /00-0A-EB-00-23-11 in
the MAC Address field.
b.
Enter wireless station A/B in the Description field.
c.
Select Enabled in the Status pull-down list.
d.
Click the Save Button.
e.
Click the Back button.
The filtering rules that are configured should look similar to the following
list:
Figure 49: Filtering Rules
